WiFi Digital to Analog (8 channel) - Wireless Digital to Analog
DAC8-8WIFI Digital to Analog Converter (8 bit)
DAC8-10WIFI Digital to Analog Converter (10 bit)
DAC8-12WIFI Digital to Analog Converter (12 bit)
DAC8-16WIFI Digital to Analog Converter (16 bit)

Click the add button to add items, then click BUY

DAC8-8WIFI D to A (8 Bit).....$ 109.95 Quantity    

DAC8-10WIFI D to A (10 Bit)...$ 119.95 Quantity    

DAC8-12WIFI D to A (12 Bit)...$ 129.95 Quantity    

DAC8-16WIFI D to A (16 Bit)...$ 144.95 Quantity    



PS-5VDC-1000 Power Adapter

Add Relay Control to your WiFi product for $29

WiFi Antenna Options

EN-D Enclosure for the DAC8-WIFI

4 Channel Version

Additional Accessories

Typical usage include control and deployment with equipment, devices and infrastructure in the following applications:   Water/fluid/air valve position control, variable-frequency drive (VFD) motor control, 4-20ma loop control, environmental controls (such as to control temperature, air flow, air damper position, water flow in zone valve systems, etc.), RF radio and instrument control (such as to control gain, voltage, current, etc.), telescope directional position control, antenna directional position control, to control satellite dish azimuth and elevation, light level control (such as to control laser, IR, ambient, etc.), audio sound level control, motion control, speed control, thrust level, thrust vector control, power output, solenoid position control, use in test fixtures (such as to control voltage, current, resistance, etc.), use in solar array applications (such as to control panel azimuth and elevation, power and charging functions, etc.) and hundreds of other applications.

• Connects directly to WiFi network or Smartphone (simulates WiFi hotspot) allowing direct wireless control of analog output levels (or connect direct to WiFi enabled PC, laptop or tablet)
• Supports the 802.11b/g/n wireless standard with password security
• Built-in Webpage allows easy configuration using your Web browser
• May be configured for STA mode (station) or AP mode (access point)
• Heartbeat signal technology provides alarm if unit is tampered with or is damaged
• Range up to 500 feet (line of sight) with extended range antenna (up to a mile or more with the use of a directional WiFi Antenna)
• 8 channels of 8 bit Digital to Analog (256 increments in output level) with DAC8-8WIFI
• 8 channels of 10 bit Digital to Analog (1,024 increments in output level) with DAC8-10WIFI
• 8 channels of 12 bit Digital to Analog (4,096 increments in output level) with DAC8-12WIFI
• 8 channels of 16 bit Digital to Analog (65,536 increments in output level) with DAC8-16WIFI
• The DAC8-WIFI may be special ordered with up to 64 channels of analog output - contact EECI support for more info
• Selectable reference voltage - allows for 0 to 3.3v, 0 to 5v or user supplied voltage output ranges
• Available with high precision voltage reference pre-installed. Allows for (0 to 1.2v), (0 to 2.048v - .5mV per increment), (0 to 2.5v), (0 to 3v) or (0 to 4.096v - 1mV per increment) output ranges
  Contact EECI support for more info
• Add the CO-420T 4-20mA Transmitter for WiFi controlled 4-20mA current loop transmitter
• Full technical support provided by on staff advisors
• Expandable to monitor up to 8 digital inputs or control up to 8 relays (or combinations) using the
  EX-8M expansion card or...
• Expandable to control up to 128 relays, monitor 128 inputs (or combinations of relays and inputs) using
  EXM-16 or EXM-32 Relay I/O Expansion Modules
• Expandable to also monitor Analog to Digital channels or control additional Digital to Analog levels - contact EECI support for more info
• Compatible with Windows 11, Windows 10, Windows Server, Windows 8.1, Windows 7, Windows Vista and Windows XP
• May be powered with wall adapter or from any Lithium Ion Battery Pack which has a USB power port using the CC-USBP3 USB Power Cable
• No complicated communication protocol - just one line of code is required to control all analog levels (or control all relays) to greatly simplify software development. The WiFi connection and all initialization is completely automated.
• Use your own program to control, read and process the 8 analog output levels or use included software
• Source code examples included on CD in Microsoft Visual Basic.Net, Visual C#, C++, Python and others
• LabVIEW compatible, includes LabVIEW VI, graphic software example and DLL library
• Includes CD (or optional USB Flash Drive) with Data Logging Software, device driver and user interface. Requires PS-5VDC-1000 power adapter